Replacing the bumper on a Ford Fusion will cost between $500 and $600. This does not include the cost of labor, which will be between $100 and $200. The total cost of replacing a bumper on a Ford Fusion will be between $600 and $800.
If you’re in need of a Ford Fusion bumper replacement, you can expect to pay anywhere from $500 to $700. This cost will vary depending on the year, model, and trim of your vehicle. If you have a higher end model or trim, you can expect to pay closer to $700.
However, if you have an older or lower end model, you may only have to pay around $500 for the replacement. No matter what your budget is, there are options available to get your Ford Fusion looking like new again.
Ford Fusion Rear Bumper Replacement
If you need to replace the rear bumper on your Ford Fusion, there are a few things you’ll need to keep in mind. First, you’ll need to remove the old bumper. To do this, you’ll need to remove the bolts that hold it in place.
Once the bolts are removed, you can carefully pull the bumper off of the car. Next, you’ll need to install the new bumper. To do this, you’ll first need to line up the new bumper with the holes on the car.
Once it’s lined up, you can bolt it into place. Be sure to tighten the bolts securely so that the bumper doesn’t come loose while driving. Finally, you’ll want to test out the new bumper to make sure everything is working properly.
Take it for a spin around the block and make sure that everything feels secure. If everything looks and feels good, then you’re all set!
2012 Ford Fusion Rear Bumper Replacement Cost
The 2012 Ford Fusion rear bumper replacement cost will be between $150 and $200. This cost does not include the labor required to remove and replace the bumper. The average time required to replace a rear bumper is 1-2 hours.
If you are considering replacing your own rear bumper, here are a few tips to make the job go smoothly: -Before starting, make sure you have all the necessary tools and parts. A complete list can be found in your Fusion’s owner manual or online.
-Be extra careful when removing the old bumper. It’s easy to damage other parts of the car while taking off the old one. -Pay close attention to how everything fits together so you can put the new bumper on correctly.
-If possible, ask a friend or family member for help. Replacing a rear bumper is much easier with two people.
2012 Ford Fusion Bumper Replacement
If you are in the market for a new car, you may be wondering about the 2012 Ford Fusion bumper replacement. This is a popular choice for many car buyers, and it is one of the most reliable models on the market. The 2012 model has been completely redesigned, and it comes with a number of new features that make it an appealing choice for anyone looking for a new car.
Here is a closer look at the 2012 Ford Fusion bumper replacement to help you make your decision. The first thing that you will notice about the 2012 Ford Fusion bumper replacement is its sleek design. The entire front end of the vehicle has been redesigned, and it now sports a more aerodynamic look.
The headlights have also been reconfigured to provide better visibility at night. In addition, the fog lights have been moved to the lower part of the front fascia to improve illumination during inclement weather conditions. Overall, the changes to the front end give the 2012 Ford Fusion bumper replacement a much sportier appearance than its predecessor.
Another notable change for the 2012 model year is under the hood where you will find a 2.0-liter four-cylinder engine that produces 240 horsepower and 270 lb-ft of torque. This represents an increase of 40 horsepower and 30 lb-ft of torque over the previous model year’s engine. The increased power output is thanks in part to twin turbochargers that force more air into the cylinders which results in greater combustion efficiency.
As far as fuel economy goes, expect to get 22 mpg in city driving and 34 mpg on highway journeys when equipped with front-wheel drive.
2010 Ford Fusion Bumper Replacement
If you’re in need of a 2010 Ford Fusion bumper replacement, we’ve got you covered. Here at Bumper Superstore, we carry a wide selection of2010 Ford Fusion front and rear bumpers to choose from. Whether you’re looking for a OEM style replacement or an aftermarket upgrade, we have what you need.
When it comes to replacing your 2010 Ford Fusion bumper, the process is relatively simple. For the front bumper, start by removing the two lower bolts that secure the fascia to the frame. Next, remove the four bolts that secure the top of the fascia to the radiator support.
With those bolts removed, the fascia should now be loose and can be pulled away from the vehicle. To install your new bumper, simply reverse these steps. For the rear bumper, begin by removing the two nuts that secure each taillight assembly to the trunk lid.
With those nuts removed, pull each taillight assembly forward and disconnect any wiring harnesses that are attached to them. Next, remove all of the bolts that secure thebumper covertothe vehicles body panels (there will be 4-5 on each side). With those bolts removed, carefully pull offthebumper cover being careful not torelease any plastic clips or break any tabsthat may still be holding it in place.
Once free fromthevehicle body panelsthe entirebumperassemblycannowberemovedfromthesupportbracketswhichareattachedtotheframeofyourauto with8mmnuts(2onone sideand3onthe other).Toinstallthenewbumpercoverfirst reconnectallwiringharnessesforyouroblongatedtaillightsandtestthembeforeproceedinganyfurther!Afterthisiscomplete lineupthenewbumpercoverwithitslocating pinsinthesamemannerastheoldoneand startinsertingallpush-pinfastenersbackinto theiroriginalholesbeingcarefulnottobreakanyofthemoff while doing so(a fewQ-tipsmay comeinhandytocleanoutdebrisbeforehand).
Onceallpushpinsareinserted securelyReattachthe4or5bolts oneachsideholdingdown thenewbumpercoverto its supporting bracketsonlyfinger tightensotheyareeasytoremoveagainif needed during adjustments!
2012 Ford Fusion Rear Bumper Replacement
The 2012 Ford Fusion has a rear bumper that is easy to remove and replace. The entire process should take less than an hour, and requires only basic hand tools.
1. Begin by removing the two screws that secure the top of the bumper to the body of the car.
These are located just behind the taillights. 2. With the screws removed, you can now pop off the plastic covers that are hiding them. Be careful not to lose these, as they will need to be replaced when you install the new bumper.
3. With the covers off, there are four bolts holding the bumper on. Remove these bolts and set them aside with the other hardware. 4. The bumper is now free!
You can carefully pull it away from the car, being careful not to damage any of the surrounding trim pieces. 5. Take your new bumper and line it up with where the old one was mounted.
Ford Fusion Front Bumper Silver
If you’re in the market for a new Ford Fusion, you may be wondering what color options are available. One popular choice is silver, and we think it looks great on the front bumper. Here’s a closer look at the silver Ford Fusion front bumper.
The first thing you’ll notice about the silver Ford Fusion front bumper is its sleek design. It’s made to complement the lines of the car, and it gives the car a sporty look. The second thing you’ll notice is that it’s made of high-quality materials.
This means that it will protect your car from minor bumps and scrapes, and it will also last for many years to come. When it comes to installation, the silver Ford Fusion front bumper is very easy to install. You won’t need any special tools or equipment, and it will only take a few minutes to complete the job.
Plus, if you ever have any problems with your bumper, you can easily contact Ford customer service for assistance. So if you’re looking for a good-looking and durable front bumper for your Ford Fusion, we recommend going with silver. It’s sure to give your car a unique look that will turn heads wherever you go!
How Much Does It Cost to Replace a Ford Fusion Bumper?
If you need to replace the bumper on your Ford Fusion, it will cost you between $200 and $600. The exact price will depend on the year, make, and model of your car, as well as the severity of the damage. If there is only minor damage, you may be able to get away with just replacing the plastic cover.
However, if the damage is more severe, you will likely need to replace the entire bumper assembly.
Is It Cheaper to Repair Or Replace a Bumper?
The cost of repairing a bumper will depend on the severity of the damage. If the bumper is only slightly scuffed or scratched, then a repair may be all that is needed. However, if the bumper is severely damaged, then it may need to be replaced.
The cost of replacing a bumper can range from $500 to $2000, depending on the make and model of the vehicle.
How Much Does a Whole New Bumper Cost?
A new bumper for your car can cost anywhere from $100 to $1,000. The price will depend on the make and model of your car, as well as the style of bumper you choose. If you have a high-end car, or if you choose a luxurious bumper, you can expect to pay closer to $1,000.
However, if you have a more basic car or you choose a simple bumper design, you should only expect to pay around $100.
How Many Days Does It Take to Replace a Bumper?
Assuming you are asking how long it would take to replace a bumper at a shop, the answer can vary depending on the make and model of your car as well as the availability of parts. In general, it should take no more than a day or two to replace a bumper. However, if your car needs special equipment or if parts need to be ordered, it could take up to a week.
2013-2020 Ford Fusion Front Bumper Removal & Replacement
If you’re in need of a Ford Fusion bumper replacement, the cost can vary depending on a few factors. The average cost for a Ford Fusion bumper replacement is between $300 and $700. However, this price can range anywhere from $100 to over $1,000 depending on the severity of the damage and whether or not you need to replace the entire bumper assembly or just the cover.
If you have comprehensive coverage on your insurance policy, your insurer may cover the cost of the replacement. Otherwise, you’ll be responsible for paying out of pocket.