Toyota Sienna Front Bumper Replacement Cost

On average, a Toyota Sienna front bumper replacement cost between $885 – $1,567. This price will vary depending on the severity of the damage, the year, make and model of your vehicle, and whether or not you have insurance. If you need to replace your front bumper, it’s important to get multiple estimates from reputable body shops before making a decision.

The cost of replacing the front bumper on a Toyota Sienna will vary depending on the year and model of the vehicle. For example, a 2008 Toyota Sienna would cost approximately $1,200 to replace the front bumper, while a 2016 Toyota Sienna would cost around $2,500 for the same repair. Ultimately, the best way to get an accurate estimate for your specific vehicle is to consult with a professional body shop.

2013 Toyota Sienna front bumper removal

How Much Does It Cost to Replace a Whole Front Bumper?

No two car accidents are alike, and therefore no two bumper replacements will be identical in terms of cost. Generally speaking, you can expect to pay somewhere between $500 and $1,500 to replace an entire front bumper. Of course, there are a number of factors that can affect this price tag, such as the make and model of your vehicle, the severity of the damage, and whether or not you have insurance coverage.

If you’re lucky enough to have comprehensive insurance, then your policy may cover the cost of a new bumper (minus any applicable deductibles). However, if you only carry liability insurance, you’ll likely be on the hook for the entire repair bill. Either way, it’s always a good idea to get several estimates from different body shops before making any final decisions.

Is It Cheaper to Repair Or Replace a Bumper?

Assuming you are asking about a car bumper: It depends on the severity of the damage and the make/model of the vehicle. Generally speaking, though, it is usually cheaper to repair a bumper than replace it.

This is because replacement bumpers can be quite expensive, especially if you need to buy one from the dealership. Additionally, some insurance companies may not cover replacement costs if the damage is not severe enough.

Can I Replace My Own Front Bumper?

If your car’s front bumper is damaged, you may be wondering if you can replace it yourself. The answer is maybe. Replacing a front bumper is not a difficult task, but it does require some knowledge and tools.

If you are not confident in your ability to do the job, we recommend taking your car to a professional. To replace your front bumper, you will need: – A new front bumper (obviously)

– A jack and jack stands or a lift – Basic hand tools including sockets, wrenches and screwdrivers – An impact gun (optional but helpful)

The first step is to remove the old bumper. This is usually done by undoing the bolts that hold it on (usually found at the top and bottom of the bumper). You may also need to remove other parts attached to the bumper such as fog lights or grilles.

Once everything is unbolted, the old bumper should come right off. With the old bumper out of the way, you can now install the new one. Simply line up the new bumper with the mounting holes on your car’s frame and bolt it in place.

Once everything is tight, double check all of your work to make sure everything looks good before taking it for a spin.

Can Plastic Bumpers Be Repaired?

Yes, plastic bumpers can be repaired. There are a few different ways to go about it, but the most common is to use a filler material and then sand and paint over the repair. This will give you a seamless look that will be almost indistinguishable from the rest of the bumper.

Toyota Sienna Front Bumper Replacement Cost


2015 Toyota Sienna Front Bumper Replacement

If you need to replace the front bumper on your 2015 Toyota Sienna, there are a few things you should know. First, you’ll need to find a compatible replacement bumper. Second, you’ll need to remove the old bumper and third, you’ll need to install the new one.

Here’s a step-by-step guide to help you through the process: 1. Find a compatible replacement bumper. You can either purchase a OEM (original equipment manufacturer) bumper or an aftermarketbumper.

If you want an exact match to your vehicle’s original bumper, go with an OEM option. Otherwise, aftermarket options will also work just fine and may even be less expensive. 2. Remove the old bumper from your Sienna.

This process will vary depending on whether your vehicle has body side molding or not. If it does, start by removing the molding first before proceeding to remove the bolts that hold the bumper in place. Once all of the bolts are removed, carefully pull off the old bumper being careful not to damage any other parts of your vehicle in the process.

3 .Install the new front bumper onto your Sienna . Again, this process will vary depending on whether or not your vehicle has body side molding .

If it does , reattach the molding first before proceeding to bolt down the new bumper into place using all of the same factory mounting points as the old one . Make sure everything is tight and secure before moving on . 4 Test fit everything one last time before taking your vehicle out for a spin .

That’s it !

2012 Toyota Sienna Front Bumper Replacement

If you’re in need of a 2012 Toyota Sienna front bumper replacement, there’s no need to fret. This is a relatively easy process that can be completed in just a few hours. Here’s everything you need to know about replacing the front bumper on your 2012 Toyota Sienna.

What You’ll Need: – New front bumper (purchased from your local Toyota dealership or aftermarket retailer) – Phillips head screwdriver

– Flathead screwdriver – Socket wrench – Ratchet

Instructions: 1. Begin by removing the two plastic screws that are located at the top of the front grill. These screws are holding the grill in place and will need to be removed before proceeding.

2. With the screws removed, gently pull on the bottom of the grill until it pops loose from its housing. Set the grill aside as you won’t need it for this repair job. 3. Next, locate the four bolts that are securing the front bumper to the frame of your vehicle.

These bolts will be located at each corner of the bumper assembly. 4 Use your socket wrench to loosen and remove these bolts completely. With all four bolts removed, you should now be able to pull off the entire front bumper assembly from your vehicle .5 Take your new bumper and line it up with where the old one was positioned .6 Start by threading in two ofthe bolts by hand before tightening them down with your socket wrench .7 Repeat this step forthe remaining two bolts until all four are secure .8 Finally, reattach your vehicle’s gril lby snapping it back into place and screwing in those two plastic fasteners at The Top.

.And That’s It!

Toyota Sienna Front Bumper Parts

If you’re in need of Toyota Sienna front bumper parts, you’ve come to the right place. Here at OEM Online Parts, we carry a wide selection of genuine Toyota parts and accessories, all at wholesale prices. Whether you’re looking for a replacement front bumper or just want to upgrade your current one, we have the parts you need.

And because we’re an authorized Toyota dealer, you can be sure that all our parts are backed by the manufacturer’s warranty. When it comes to finding the perfect front bumper for your Toyota Sienna, there are a few things to keep in mind. First, consider what material you want.

OEM Online Parts offers both plastic and steel bumpers for your Sienna. Plastic bumpers are typically lighter and more affordable than their steel counterparts, but they don’t offer as much protection in the event of a collision. Steel bumpers are heavier and more expensive, but they’re much more durable and will provide better protection in an accident.

Another thing to consider is how visible you want your front bumper to be. If you want maximum protection without sacrificing style, go with a black or dark-colored bumper. But if you prefer something that’s more eye-catching, we offer several different colors and designs to choose from.

No matter what look you’re going for, we have the perfect Toyota Sienna front bumper for you!


The Toyota Sienna is a reliable and affordable minivan that is perfect for families. It is spacious and has a lot of features that make it a great choice for those who need a vehicle that can transport a lot of people and cargo. The front bumper replacement cost for this vehicle is relatively low, making it an even more attractive option for buyers.

Leave a Comment