A replacement turbo for a 6.7 Cummins engine will cost around $1,500.
If you’re the owner of a Dodge Ram 2500 or 3500 truck with a 6.7-liter Cummins turbo-diesel engine, you may be wondering about the cost of replacing the turbocharger. While the cost can vary depending on a number of factors, such as the age and condition of your truck and the type of turbocharger you need, you can expect to pay between $2,500 and $3,500 for a new turbocharger.
If you’re considering replacing the turbocharger on your 6.7-liter Cummins engine, it’s important to understand the different types of turbochargers and how they work. There are two main types of turbochargers: wastegate and variable geometry.
A wastegate turbocharger is the more common type of turbocharger, and it’s typically less expensive than a variable geometry turbocharger. Wastegate turbochargers use a valve to control the amount of exhaust that bypasses the turbine. This type of turbocharger is less complex than a variable geometry turbocharger, and it’s less likely to experience issues.
A variable geometry turbocharger is more complex than a wastegate turbocharger, and it’s more expensive. This type of turbocharger uses vanes to control the airflow through the turbine. Variable geometry turbochargers are more efficient than wastegate turbochargers, but they’re also more likely to experience issues.
How Much Does It Cost To Replace A 6.7 Cummins Turbo?
$3,500-$4,000
If your Cummins 6.7-liter turbo has failed, you’re probably wondering how much it will cost to replace it. While the cost will vary depending on the specific situation, you can expect to pay anywhere from $3,000 to $5,000 for a new turbo.
Here’s a step-by-step breakdown of what you can expect:
1. Remove the old turbo: This will involve disconnecting a variety of hoses and electrical connections. You’ll also need to remove the old turbo from its mount. Expect to spend a couple of hours on this step.
2. Install the new turbo: This is essentially the reverse of step one. You’ll need to connect all of the hoses and electrical connections, and then mount the new turbo. Again, expect to spend a couple of hours on this step.
3. bleed the air out of the fuel system: This is a crucial step, as air in the fuel system can cause all sorts of problems. You’ll need to bleed the air out of the lines leading to the injectors.
4. start the engine and check for leaks: Once the new turbo is installed, start the engine and check for any leaks. If everything looks good, you’re ready to go!
As you can see, replacing a Cummins 6.7-liter turbo is not a quick or easy task. However, it is something that can be done at home with the right tools and knowledge. If you’re not comfortable tackling this project yourself, you can always take it to a mechanic.
How Difficult Is It To Replace A 6.7 Cummins Turbo?
It is difficult to replace a 6.7 cummins turbo.
If you have a 6.7 cummins turbocharged diesel engine, you may be wondering how difficult it is to replace the turbo. While it is a fairly involved process, it is not impossible to do yourself if you have some mechanical aptitude and basic tools. Here is a step-by-step guide to replacing your 6.7 cummins turbo:
1. Disconnect the battery negative cable.
2. Remove the air intake duct and air filter housing.
3. Disconnect the turbocharger oil supply line and drain any oil from the line.
4. Remove the turbocharger exhaust manifold.
5. Remove the turbocharger from the engine.
6. Install the new turbocharger, making sure to properly connect all lines and hoses.
7. Reinstall the turbocharger exhaust manifold.
8. Reconnect the air intake duct and air filter housing.
9. Reconnect the battery negative cable.
10. Start the engine and check for proper operation.
While this may seem like a lot of steps, it is actually a pretty straightforward process. And, if you take your time and follow the steps carefully, you should be able to replace your 6.7 cummins turbo without any major issues.
What Are The Steps Involved In Replacing A 6.7 Cummins Turbo?
The steps involved in replacing a 6.7 cummins turbo are: 1. remove the old turbo 2. install the new turbo 3. reconnect the turbo to the exhaust 4. reconnect the turbo to the intake 5. start the engine and check for leaks
If your Cummins turbo needs replacing, don’t despair. While it’s not a job for the faint of heart, it is possible to do it yourself with the right tools and a little know-how. Here’s a step-by-step guide to help you through the process.
1. Park your truck on level ground and set the parking brake. This will ensure that your truck doesn’t move while you’re working on it.
2. Disconnect the negative battery cable to prevent any electrical accidents.
3. Find the turbocharger. It’s located behind the engine, on the passenger side.
4. Disconnect the turbocharger from the exhaust manifold. You’ll need a wrench to do this.
5. Unbolt the turbocharger from the engine block. Again, you’ll need a wrench for this.
6. Remove the old turbocharger and install the new one. Make sure to bolt it in place securely.
7. Reconnect the turbocharger to the exhaust manifold.
8. Reconnect the negative battery cable.
9. Start the engine and check for leaks. If everything looks good, you’re all set!
Replacing a turbocharger is a big job, but with the right tools and a little know-how, it’s something you can do yourself. Just follow the steps outlined above and you’ll have your truck up and running in no time.
What Are The Most Common Problems With 6.7 Cummins Turbos?
The most common problems with 6.7 cummins turbos are leaks and oil issues.
If your 6.7 Cummins turbocharged diesel engine is experiencing any of the following problems, it might be time for some maintenance or repairs.
1. Lack of power
If you’ve noticed a loss of power when accelerating or towing, it could be due to a problem with your turbocharger. One possible cause is a clogged air filter, which restricts airflow to the turbo. Another possibility is a sticking wastegate, which can cause the turbo to overspin and lose power.
2. Excessive smoke
If you’re seeing excessive smoke from the exhaust, it could be an indication of a problem with the turbocharger. One possibility is that the turbo is overboosting, which can cause the engine to run too rich and produce a lot of smoke. Another possibility is a leaking turbo seal, which can allow oil to enter the exhaust and create a blue smokecondition.
3. Engine overheating
If the engine temperature starts to climb, it could be due to a problem with the turbocharger. One possibility is that the turbo is overboosting, which can cause the engine to run too hot. Another possibility is a clogged intercooler, which can cause the turbo to overheat and eventually fail.
4. strange noises
If you notice any strange noises coming from the engine, it could be an indication of a problem with the turbocharger. One possibility is that the turbo bearings are worn out, which can cause a whiningnoise. Another possibility is a damaged turbo impeller, which can cause a rattlenoise.
If you’re experiencing any of these problems, it’s important to have the turbo inspected by a qualified diesel mechanic. They can diagnose the problem and make the necessary repairs.
FAQ
What Are Some Tips For Replacing A 6.7 Cummins Turbo?
How Often Should A 6.7 Cummins Turbo Be Replaced?
What Are The Consequences Of Not Replacing A 6.7 Cummins Turbo?
Is It Worth Replacing A 6.7 Cummins Turbo?
Conclusion
The average cost to replace a 6.7 Cummins turbo is between $2,500 and $3,500. This cost will vary depending on the make and model of the vehicle, as well as the location of the repair shop.
Hopefully, you now have a clear understanding of the cost of replacing a turbo on a 6.7 Cummins engine. If you have any further questions, please don’t hesitate to ask in the comments section below.