The cost to repair an electronic throttle control on a Jeep Wrangler will vary depending on the severity of the issue and the make and model of the vehicle. A qualified mechanic will be able to diagnose the problem and provide an estimate for the repairs.
If your Jeep Wrangler is experiencing issues with the electronic throttle control, you may be wondering how much it will cost to repair. The good news is that the average cost of repair is around $200. However, there are a few things that can affect the cost of repair, such as the severity of the issue and whether or not you need to replace any parts.
FIXED: Electronic Throttle Control Warning Light On My 2010 Jeep Wrangler Sahara
How Much Does It Cost to Fix Electronic Control Throttle?
It can cost anywhere from $200 to $2,000 to fix an electronic control throttle, depending on the severity of the problem and the make and model of the vehicle. In some cases, a simple software update may be all that’s needed to fix the issue, while in other cases, a complete replacement of the throttle body may be necessary. Many factors will affect the final cost of repairs, so it’s always best to consult with a qualified mechanic or dealership service department for an accurate estimate.
How Much Does It Cost to Replace Electronic Throttle Control in Jeep Wrangler?
The cost of replacing an electronic throttle control in a Jeep Wrangler can vary depending on the year and model of the vehicle. For example, a 2016 Jeep Wrangler may have a different cost than a 2019 Jeep Wrangler. Additionally, the cost may also differ depending on where you take your vehicle to get the replacement done.
However, on average, it generally costs between $500-$1000 to replace an electronic throttle control in a Jeep Wrangler.
How Much Does It Cost to Replace a Throttle Body on a Jeep?
If you’re like most Jeep owners, you probably don’t think too much about your throttle body. But what exactly is a throttle body and why does it need to be replaced? Let’s take a closer look.
The throttle body is a component of the fuel injection system. It’s located between the air intake and the engine, and its job is to control the amount of air that flows into the engine. The throttle body is controlled by the accelerator pedal, and when you press down on the pedal, the throttle body opens up to allow more air to enter the engine.
This increase in airflow allows more fuel to be injected into the engine, which results in more power.
Over time, however, thethrottle body can become dirty or clogged with carbon deposits. When this happens, it can cause all sorts of problems, including reduced power and economy.
In some cases, it can even cause stalling or misfiring. That’s why it’s important to have your throttle body cleaned or replaced as needed.
How much does it cost to replace a throttle body on a Jeep?
Well, that depends on a few things, such as whether you do it yourself or have someone else do it for you; and whether you need just a cleaning or a full replacement. Generally speaking though, expect to pay anywhere from $100-$300 for parts and labor (if someone else does it). If you do it yourself though, you’ll obviously just be paying for parts – which will likely set you back $50-$200 depending on make/model/year of your Jeep.
Can I Drive With Electronic Throttle Control Light On?
If you have an electronic throttle control light on your dash, it’s important to take heed and not ignore it. This light is telling you that there is a problem with your car’s throttle body or related parts, and if ignored, could lead to engine damage.
The first thing you should do if this light comes on is to check your car’s owner’s manual to see what it says about the issue.
If possible, try to find a shop manual as well for more detailed information. Once you know what the light means, you can start troubleshooting the problem.
There are a few things that could cause your electronic throttle control light to come on.
One possibility is a dirty throttle body. If there is build-up on the sensors or other parts of the throttle body, it can cause problems with the way the car’s computer controls the throttle. You can clean the throttle body yourself or take it to a mechanic to have it done.
Another possibility is a faulty sensor in the throttle body assembly. These sensors are responsible for sending information about the position of the throttles back to the car’s computer so it knows how much power to give the engine. If one of these sensors isn’t working properly, it can cause issues with engine performance as well as trigger the electronic throttle control light.
Replacing a bad sensor should fix this problem.
In some cases, something as simple as a loose electrical connection can cause your electronic throttle control light to come on. The easiest way to check for this is by using a voltmeter or test light; if there is no power going to one of the sensors in the assembly, then that could be whythe light is coming on .
Tightening up any loose connections and making sure all wires are securely connected should solve this issue quickly and easily..
Credit: www.cashcarsbuyer.com
Jeep Wrangler Electronic Throttle Control Reset
If your Jeep Wrangler is experiencing issues with its electronic throttle control, there are a few things you can do to reset it. First, check the battery voltage and make sure it is above 12.5 volts. If it is not, charge or replace the battery.
Next, disconnect the negative battery cable and ground it to the engine block for 30 seconds. This will discharge any static electricity that may be causing problems. Finally, reconnect the negative battery cable and start the engine.
The electronic throttle control should now be reset and working properly.
Jeep Electronic Throttle Control Reset
If your Jeep’s electronic throttle control light is on, it means that the system has detected a problem and needs to be reset. Here’s how to do it:
1. Turn off the engine and disconnect the negative battery cable.
2. Remove the air intake duct and air filter housing.
3. Locate the throttle body on the engine and remove the three bolts that hold it in place.
4. Carefully remove the throttle body from the engine and clean it with a rag or brush.
Be sure to remove any dirt or debris that could prevent proper operation.
5.Reinstall the throttle body and bolt it in place.
Jeep Electronic Throttle Control Recall
On June 4, 2018, Fiat Chrysler Automobiles (FCA) announced a recall of nearly 5 million vehicles equipped with electronic throttle control (ETC). The recall affects certain Jeep, Dodge, Chrysler, and Ram models from the 2012-2014 model years.
According to FCA, a software glitch can cause the ETC system to unexpectedly enter into “limp mode,” which limits engine power and vehicle speed.
This can happen without warning and may increase the risk of a crash.
FCA is urging all affected customers to bring their vehicles to a dealer for service as soon as possible. In the meantime, drivers are advised to use caution when driving and be prepared for unexpected changes in vehicle performance.
This is not the first time that FCA has had issues with its ETC system; in 2015, the company issued a recall for 1.4 million vehicles due to a similar problem.
Autozone
AutoZone is an American retailer of aftermarket automotive parts and accessories, headquartered in Memphis, Tennessee. Founded in 1979, AutoZone has over 6,000 stores across the United States. The company also offers a variety of services for its customers, including AutoZoner Services, car repairs and diagnostics.
Throttle Body Replacement Cost
A throttle body is a device located between the air intake and the engine. It regulates the amount of air that flows into the engine based on how much gas pedal is being pressed. Over time, carbon and other deposits can build up on the throttle body, which can cause it to stick or not function properly.
This can lead to decreased fuel economy and performance. When this happens, it’s time for a throttle body replacement.
The cost of replacing a throttle body will vary depending on the make and model of your vehicle.
In most cases, you can expect to pay between $200 and $600 for parts and labor. However, if your vehicle has an intricate throttle body system, the cost could be closer to $1,000. Before having your throttle body replaced, be sure to get a few different quotes from reputable mechanics to ensure you’re getting the best price possible.
Bad Throttle Body Symptoms
A throttle body is responsible for regulating the airflow that enters the engine. It is located between the air filter and the intake manifold, and it consists of a butterfly valve that opens and closes to control the amount of air that flows through. When the throttle body becomes dirty or clogged, it can cause a variety of problems.
Bad throttle body symptoms include reduced fuel economy, decreased power, hesitations during acceleration, stalling, and rough idling. The check engine light may also come on. If you notice any of these problems, it’s important to have your throttle body serviced as soon as possible to avoid further damage to your engine.
What Does a Throttle Body Do
A throttle body is a component of an internal combustion engine that controls the amount of air that flows into the engine. The throttle body is located between the air intake and the engine, and it regulates the flow of air into the engine by opening and closing in response to the amount of pressure that is applied to it.
The throttle body is controlled by a throttle cable or electronic Throttle Control (ETC) system.
When you press down on the accelerator pedal, it sends a signal to the throttle body telling it to open up and allow more air to flow into the engine. The more air that flows into the engine,the more fuel can be burned and this increases power. Conversely, when you let off the accelerator pedal,the signal tells the throttle body to close down and restrict airflow into the engine which reduces power.
Conclusion
The cost to repair an electronic throttle control on a Jeep Wrangler can be quite expensive. However, if you are able to do the repairs yourself, it can save you a lot of money.