Broken Lug Nut Stud Cost

If you have a broken lug nut stud, it will need to be replaced. The cost will depend on the make and model of your vehicle as well as the labor costs of the mechanic. In some cases, the stud can be repaired but it is usually best to replace it.

If you’re reading this, chances are you’ve broken a lug nut stud and are wondering what the cost will be to fix it. The good news is that it’s not as expensive as you might think. The bad news is that it’s still not cheap.

To replace a broken lug nut stud, you’ll need to take your car to a mechanic or dealership. They will remove the wheel and then drill out the old stud. Next, they’ll tap a new thread and insert a new stud.

Finally, they’ll re-install the wheel and torque everything down to spec. The entire process shouldn’t take more than an hour or two, but it will likely cost you between $100 and $200 depending on the shop you go to. So while it’s not cheap, it’s also not as expensive as some other repairs that your car might need.


Can I Drive With a Broken Lug Nut Stud?

If you have a broken lug nut stud, it is not safe to drive your vehicle. The lug nuts hold the wheel onto the car, so if one of them is not secure, it could come off while you are driving and cause an accident. It is best to have a professional mechanic fix the problem for you.

How Much Does It Cost to Replace a Broken Stud?

If you have a broken stud, it will need to be replaced. Depending on the severity of the break, this can be done by a professional or by yourself. If the break is severe, it is best to leave it to a professional.

Replacing a broken stud can cost anywhere from $50-$200.

Is It Easy to Replace Lug Studs?

No, it is not easy to replace lug studs. Although there are kits available that make the process somewhat easier, it is still a difficult and time-consuming task. In most cases, it is best left to a professional mechanic.

Can Discount Tire Fix a Broken Lug Nut?

If you have a broken lug nut, it’s best to take your car to a mechanic or a tire shop. Discount Tire can’t fix a broken lug nut.

Broken Lug Nut Stud Cost


Wheel Stud Repair near Me

If your wheel studs are damaged, it’s important to get them repaired as soon as possible. Wheel studs play a vital role in keeping your wheels attached to your vehicle, so if they’re not functioning properly, it could lead to serious problems. There are a few different ways that you can repair damaged wheel studs.

You can either replace the entire stud, or just the damaged portion. If you’re replacing the entire stud, it’s important to make sure that you get the correct size for your vehicle. Otherwise, you may have difficulty getting the new stud to fit correctly.

If you’re only replacing the damaged portion of the wheel stud, it’s important to remove all of the old material from the threads before installing the new piece. This will ensure that there’s a good connection between the new and old parts of the stud. Once you’ve replaced or repaired your wheel studs, be sure to test them out before driving on them again.

Make sure that they’re securely fastened and that there’s no looseness or movement in them. If everything seems fine, then you should be good to go!

Broken Lug Nut Stud Repair

If you’re a car owner, then you know that one of the most important parts of your vehicle is the lug nuts. These small pieces keep your wheels attached to your car, and if one should break, it can cause some serious problems. Fortunately, there is a way to fix a broken lug nut stud, and it’s not as difficult as you might think.

The first thing you’ll need to do is remove the wheel from the affected area. Once the wheel is off, you’ll be able to see the broken stud more clearly. Using a drill, start by drilling out the center of the stud.

Be careful not to damage any other parts of your car while doing this. Once the center of the stud has been drilled out, take a hammer and tap around the edges of the hole until the entire stud comes out. Now that the old stud has been removed, it’s time to install the new one.

First, thread in one side of the new stud until it’s snug against the wheel hub. Then do the same on the other side. Finally, use your drill to screw in both sides ofthe new stud until it’s firmly in place.

That’s all there is to it! With this quick and easy repair job, you’ll have your car back onthe road in no time flat.

Wheel Stud Replacement Shop

If your car has a problem with its wheel studs, you may need to take it to a shop that specializes in replacing them. Wheel studs are responsible for holding the wheels onto the car, so if they’re not working properly, it can be dangerous. There are a few signs that you might need new studs, including:

– Your wheels feel loose – You hear clicking or rattling when you drive – Your tires seem to be coming off more often than usual

If you suspect that your studs need to be replaced, the best thing to do is take your car to a professional. They’ll be able to tell you for sure and then replace the studs if necessary. This is generally a relatively quick and easy repair, so it shouldn’t cost too much money.


The cost of a broken lug nut stud can range from $50 to $200. Depending on the severity of the break, the cost will vary. If the break is severe, it may require a new wheel and/or tire.

If the break is not severe, it may only require a new lug nut and stud.

Leave a Comment