Assuming you are referring to a 2019 Chevy Malibu, the rear bumper replacement cost would be $1,575 – $1,725. This cost would include the price of the bumper itself as well as labor costs. Factors that could affect the final cost include the year of the car and whether or not sensors or other components are damaged along with the bumper.
If you’re in need of a Chevy Malibu rear bumper replacement, you can expect to pay anywhere from $400 to $700. The cost will vary depending on the year, make, and model of your car. But rest assured, it’s a fairly simple process that most mechanics should be able to do in no time.
2015 Chevy Malibu Rear Bumper Replacement Cost
The 2015 Chevy Malibu rear bumper replacement cost is $265. This cost does not include labor, only the price of the replacement bumper itself. The average labor cost for this job is between $100 and $200, making the total estimated repair cost between $365 and $465.
2017 Chevy Malibu Rear Bumper Replacement Cost
If you’re in need of a rear bumper replacement for your 2017 Chevy Malibu, you can expect to pay anywhere from $200 to $400. This cost will vary depending on the type of material used for the replacement as well as the labor costs associated with the repair.
If you have a minor rear-end collision, it’s possible that only the bumper itself will need to be replaced.
However, if there is more significant damage, you may also need to replace other parts such as the taillights or even the trunk lid. In this case, your total repair cost could increase to around $1,000 or more.
It’s always best to consult with an experienced automotive body shop to get an estimate for your particular repair needs.
They will be able to give you a more accurate idea of what parts need to be replaced and how much it will all cost.
2018 Chevy Malibu Rear Bumper Replacement Cost
The average cost for a Chevrolet Malibu rear bumper replacement is between $857 and $1,107. Labor costs are estimated between $146 and $184 while parts are priced at $711. This range does not include taxes and fees, and does assume that the existing bumper is in good condition and can be reused.
If the bumper is beyond repair, or if you desire an upgrade, the cost will be significantly higher.
There are several reasons why you might need to replace your Chevy Malibu’s rear bumper. Perhaps you were in a minor fender bender and the damage was limited to the bumper.
Or maybe you’re just looking to upgrade the look of your car with a new aftermarket bumper. Whatever the reason, we’ve got all the information you need on Chevrolet Malibu rear bumper replacement cost.
The first thing you’ll need to do is remove the old bumper from your car.
This process will vary depending on whether your car has a body-colored or chrome-accented rear bumper. For body-colored bumpers, there will likely be some plastic clips holding it in place which can be easily removed with a flathead screwdriver or pliers. If your Malibu has a chrome accent strip running across the back of the trunk lid (as pictured above), then there are probably bolts holding it in place which will require a socket wrench to remove them.
Once the old rearbumper is off, take it to your local auto parts store so they can help you find an exact match for your car’s make, model, and year. Be sure to also ask about any specials or discounts they may be currently offering on replacement parts like this one! With that taken care of, all that’s left to do is install the new rearbumper onto your Chevy Malibu!
Chevy Malibu Bumper Replacement Cost
The Chevrolet Malibu is a midsize car manufactured and marketed by Chevrolet since 1964. The Malibu began as a trim-level of the Chevrolet Chevelle, becoming its own model line in 1978. Originally a rear-wheel-drive intermediate, GM revived the Malibu nameplate as a front-wheel-drive car in 1997.
Named after coastal community of Malibu, California, the Malibu was marketed primarily in North America, with the eighth generation introduced globally.
For generations 6 through 8 (2003–2012), the Malibu was produced in Fairfax Assembly & Stamping in Kansas City, Kansas for North American markets and Bupyeong-gu for South Korea market until 2011 when production moved exclusively to Detroit/Hamtramck Assembly in Hamtramck, Michigan from 2011 onwards for all markets except China where it is still made by Shanghai GM (SAIC Motor). The ninth generation was introduced in early 2012 as an early 2013 model year vehicle.
Generation six (2003–2007)
Sixth generation malibus were available with four different engines; a 2.2L Ecotec I4 engine that produced 135 hp (101 kW), followed by two different 3.1L V6s that produced 190 hp (142 kW) or 200 hp (149 kW). A five-speed manual transmission was standard equipment on all models except the 2.2L equipped base model which used a Getrag F23 5MT; an Aisin AF33 5-speed automatic transmission was optional on all models except the LS which used General Motors’ Hydra-Matic 4T45E 4 speed automatic transmission.
In 2004, Chevrolet offered XM Satellite Radio on higher end models such as the LT and SS trims while OnStar became standard equipment across all trims levels including LS starting late 2004 .
2019 Chevy Malibu Front Bumper Replacement
If you’re looking to replace the front bumper on your 2019 Chevy Malibu, you’ve come to the right place. In this blog post, we’ll go over everything you need to know about replacing your front bumper, including what tools and materials you’ll need, how to remove your old bumper, and how to install your new one. We’ll also provide some tips and tricks along the way to make sure the job goes smoothly.
So let’s get started! The first thing you’ll need is a new front bumper for your Chevrolet Malibu. You can purchase this from a variety of places, both online and offline.
We recommend checking out Amazon or eBay for a wide selection and great prices. Once you have your new bumper, it’s time to start the replacement process.
The first step is to remove the old bumper from your Chevy Malibu.
This is relatively easy to do – simply unclip the two tabs that hold it in place at the top of the grille (one on each side), then pull it straight off. With the old bumper removed, take a look at the backside of the new one and locate the three bolts that will attach it in place.
Thread these bolts into place by hand (do not use a power drill), being careful not to overtighten them as this could strip the threads.
Once all three bolts are in place, tighten them down with a socket wrench until they’re snug but not too tight – again, you don’t want to strip anything here!
Now comes time to reattach your front fascia (the plastic piece that covers up all of these components). Start by clipping it back into place at the top of each side where it meets up with the grille surround.
2018 Chevy Malibu Front Bumper Replacement Cost
When it comes to replacing the front bumper on your 2018 Chevy Malibu, the cost can vary depending on a few different factors. For example, if you need to replace the entire bumper assembly, that will obviously cost more than just replacing a single part of the bumper. Additionally, the price of the replacement parts can vary depending on where you purchase them from.
With all that said, we’ve compiled some average costs for 2018 Chevy Malibu front bumper replacements below:
– Replacing just the front bumper cover: $200-$300
– Replacing the entire front bumper assembly: $600-$800
Credit: www.youtube.com
How Much Does It Cost to Replace a Bumper on a Chevy Malibu?
If you’re in need of a bumper replacement for your Chevy Malibu, you can expect to pay anywhere from $300 to $1,200. This will largely depend on the type of bumper you need as well as the year and model of your vehicle.
For instance, if you have a newer model Malibu with a plastic bumper, you may be able to get away with a simple repair that costs around $300.
However, if you have an older model or one with a steel bumper, you’ll likely be looking at a replacement which could cost upwards of $1,000. Additionally, if your car was in an accident and sustained damage to other parts beyond just the bumper, those repairs will obviously add to the final bill.
In any case, it’s always best to consult with a professional mechanic or body shop to get an accurate estimate for what exactly needs to be done to fix your bumper.
And remember, even though replacing a bumper isn’t cheap, it’s still cheaper than getting into another accident!
How Much Does It Cost to Replace an Entire Rear Bumper?
It costs between $200 and $600 to replace a rear bumper, depending on the make and model of your car. The cost of labor will be higher if you have a luxury car or SUV.
Is It Cheaper to Repair Or Replace a Bumper?
It really depends on the severity of the damage and what needs to be done to repair it. If it’s just a small dent or scratch, then repair is probably your best bet. However, if the bumper is severely damaged, then replacement is probably your best option.
Is It Hard to Replace a Back Bumper?
No, replacing a back bumper is not hard. Depending on the make and model of your vehicle, you may be able to do it yourself. However, if you are not comfortable doing so, you can always take it to a professional mechanic.
2020 Chevy Malibu rear bumper removal
Conclusion
The cost of a Chevy Malibu rear bumper replacement will vary depending on the model and year of the vehicle. The average cost for this type of repair is between $200 and $500.