The cost to replace a head gasket on a Ford Focus can vary depending on the year and model of the vehicle. The average cost for a Focus head gasket replacement is between $1,200 and $1,500. This includes the cost of parts and labor.
If your Ford Focus has a blown head gasket, you’re probably wondering how much it will cost to replace it. The good news is that the average cost of a Ford Focus head gasket replacement is between $1,500 and $2,000. The bad news is that this is still a pretty significant repair bill.
There are a few things that can affect the final cost of your head gasket replacement, including the severity of the damage and whether or not you need to replace any other parts while you’re at it (like the cylinder heads). But all in all, you can expect to pay somewhere in the ballpark of $1,500 to $2,000 to get your Ford Focus back on the road with a new head gasket.
2012 Ford Focus SE: Head Gasket (#1)
Ford Focus Head Gasket Recall
In February of 2012, Ford announced a recall of about 12,000 Focus models from the 2012 model year. The recall was for a problem with the head gasket. According to Ford, a manufacturing error could cause the head gasket to fail and leak engine coolant.
This could lead to overheating and engine damage. Ford said that it would notify owners of the affected vehicles and repair them free of charge.
Ford Focus Head Gasket Symptoms
If your Ford Focus is suffering from any of the following symptoms, then it’s possible that the head gasket has failed and needs to be replaced.
1. Overheating Engine: One of the most common symptoms of a blown head gasket is an overheating engine. If you notice that your engine temperature gauge is rising higher than normal, or if your engine starts to overheat, then this is a sign that something is wrong.
2. White Exhaust Smoke: Another symptom of a blown head gasket is white exhaust smoke. This occurs when coolant leaks into the cylinders and mixes with the combustion gases. The result is a white smoke coming from the tailpipe.
3. Coolant Leaks: A third symptom of a blown head gasket is coolant leaks. If you notice coolant leaking from under the hood, then this could be a sign that the head gasket has failed and needs to be replaced.
4. Oil Leaks: A fourth symptom of a blown head gasket is oil leaks.
2013 Ford Focus Head Gasket Replacement
If your 2013 Ford Focus is in need of a head gasket replacement, don’t despair – this is a fairly common repair that can be completed relatively easily. Here’s what you need to know about replacing the head gasket on your Ford Focus.
The head gasket sits between the engine block and the cylinder head, and its primary purpose is to seal these two components together.
over time, however, the head gasket can become damaged or blown, which will cause coolant and oil to mix together – something that can lead to serious engine damage.
Fortunately, replacing the head gasket on your Ford Focus is relatively straightforward. First, you’ll need to remove the old head gasket – this can be done with a putty knife or other similar tool.
Next, clean up any debris or residue from the surface of the engine block and cylinder head using a wire brush or other abrasive tool.
Once the surface is clean, you’ll then need to apply a generous amount of sealant to both the engine block and cylinder head before installing the new head gasket. Be sure to follow all instructions carefully when doing this step; if not done correctly, it could result in an improper seal which would ultimately cause leaks.
Finally, reinstall all parts and components according to their respective manuals before starting up your vehicle for a test drive!
Ford Focus Head Gasket Problems
The Ford Focus has a history of head gasket problems. The head gasket is a seal between the engine block and cylinder head. It prevents coolant and oil from leaking into each other.
A blown head gasket can cause coolant to leak into the cylinders, which can lead to engine damage. The problem typically occurs in older model years (2000-2003), but can occur in newer models as well. If you think your Focus may have a blown head gasket, it’s important to take it to a mechanic right away so they can diagnose the problem and make repairs before any further damage is done.
2012 Ford Focus Head Gasket Replacement
If your 2012 Ford Focus is in need of a head gasket replacement, don’t despair. This is a relatively common repair and one that can be done at home with the right tools and know-how. Here’s what you need to know about replacing the head gasket on your 2012 Ford Focus.
The head gasket is responsible for sealing the combustion chamber in your engine. Over time, it can wear out or become damaged, resulting in leaks. When this happens, you’ll need to replace it to keep your engine running properly.
Fortunately, replacing the head gasket on your 2012 Ford Focus is a relatively straightforward process. You’ll need a few basic tools and some patience, but it’s definitely doable at home. With a little time and effort, you’ll have your Focus back on the road in no time!
Ford Focus Valve Cover Gasket
When it comes to your Ford Focus, one of the most important parts to keep an eye on is the valve cover gasket. This small but mighty seal keeps oil from leaking out of the engine and helps protect against dirt and debris getting into the engine. Over time, this gasket can wear down and eventually need to be replaced.
If you’re noticing oil leaks or your engine running less smoothly than usual, it’s likely time for a new valve cover gasket.
Replacing the valve cover gasket is a fairly simple process that can be done at home with just a few tools. First, you’ll need to remove the old gasket from the valve cover.
This can be done with a putty knife or other flat tool. Once the old gasket is removed, clean off any residue and debris from both the valve cover and cylinder head surface. Then, apply a thin layer of sealant to both surfaces before installing the new gasket.
Be sure to align all of the bolt holes before pressing the gasket into place. Finally, reinstall all of the bolts (in sequence) and torque them to specifications.
Once you’ve replaced the valve cover gasket, you should notice improved oil pressure and reduced leaking.
Blown Head Gasket Ford Focus
If your Ford Focus has a blown head gasket, it’s important to get it fixed as soon as possible. A blown head gasket can cause your engine to overheat and can lead to serious engine damage.
There are a few signs that you may have a blown head gasket, such as white smoke coming from your exhaust or coolant leaking from your engine.
If you notice either of these symptoms, take your car to a mechanic and have them check for a blown head gasket.
If you do have a blown head gasket, the repair can be expensive. The good news is that many insurance policies will cover at least some of the cost of repairs.
So if you have comprehensive coverage, be sure to check with your insurer to see if they will help pay for the repairs.
2005 Ford Focus Head Gasket Replacement
If your 2005 Ford Focus has a blown head gasket, you’ll need to replace it as soon as possible. A head gasket replacement is a fairly straightforward repair, but it can be expensive if you have to pay a mechanic to do it. Luckily, we’ve got a step-by-step guide that will show you how to replace your Focus’ head gasket yourself.
Before you begin, make sure you have all the tools and parts you’ll need:
– New head gasket
– Head bolts (10mm)
– valve cover bolts (8mm)
– torque wrench
pliers
screwdriver
socket set
ratchet
penetrating oil
coolant
catch basin or bucket
Once you have everything gathered, follow these steps:
1. Drain the coolant from your engine by removing the radiator cap and opening the drain valve at the bottom of the radiator. Collect the coolant in a catch basin or bucket.
2. Disconnect the negative battery cable to prevent any electrical shorts while working on your engine.
3. Remove the plastic engine shrouding so that you have better access to the engine components. 4. Unbolt and remove the 10mm head bolts using a socket and ratchet . Be careful not to drop them into the cylinder heads! 5. Carefully lift off the cylinder head itself, being mindful not to damage any of its surfaces . 6. Take outthe oldheadgasket and discard it . Inspectthe mating surfaces ofthe blockand cylinderhead for any defects or damage that may have occurred .
Credit: www.youtube.com
How Much Does It Cost to Change the Head Gasket on Ford Focus?
If you’re looking to change the head gasket on your Ford Focus, it’s important to know how much it will cost. Depending on the severity of the issue, the price can range from a few hundred dollars to over a thousand. If you have a mechanic do the work for you, expect to pay on the higher end of that scale.
If you’re comfortable doing the work yourself, you can find kits online for under $100. However, keep in mind that this is a complex repair and should only be attempted by experienced mechanics.
Is It Worth Fixing a Blown Head Gasket?
A blown head gasket can be a pain to deal with. But is it worth fixing? Let’s take a look at the pros and cons.
Pros:
-You can avoid expensive engine repairs or replacements.
-It can extend the life of your car.
-Fixing a blown head gasket is usually cheaper than replacing an engine.
Cons:
-It can be difficult to find the root cause of the problem if you don’t have experience with car repair.
-The process of repairing a blown head gasket can be time consuming.
-If not done correctly, it could lead to more problems down the road.
overall, fixing a blown head gasket is usually worth it in the long run.
It can save you money and extend the life of your car. But make sure you know what you’re doing, or else you could end up causing more damage than good.
What are the First Signs of a Blown Head Gasket?
If your car is running hot or over heating, this could be a sign that your head gasket has blown. Another symptom of a blown head gasket is if you see white smoke coming from your exhaust pipe. You might also notice an oily residue on the outside of your tailpipe.
These are all signs that you should take your car to a mechanic to have it checked out.
Can I Still Drive My Car With a Blown Head Gasket?
Assuming you have a car with a combustion engine, the short answer is no. If your head gasket is blown, it means that there is a hole in it and gas and oil are leaking into the cylinders. This will cause your car to overheat and can damage the engine.
Conclusion
The cost to replace a head gasket on a Ford Focus can vary depending on the severity of the leak and the labor costs associated with the repair. A head gasket replacement is not a simple fix, and it should only be attempted by a qualified mechanic. If your Focus is leaking coolant or oil, or if you notice any other signs of engine trouble, take it to a mechanic right away.
Ignoring these problems can lead to even more expensive repairs down the road.